Index du forum
M
e
n
u

Dl103 boron ou alu

Le passé aurait de l'avenir.

Retourner vers Le Vinyle



Dl103 boron ou alu

Message #1 par Dominique-Tanguy » 18 Jan 2024 à 11:14

Bonjour,

Je vais faire l’expérience de faire retipper une DL103 en Allemagne. Il y a différentes options :

Canteliver en alu, ou en boron

Diamants :

OGURA PA Vital Fine-Line
Shibata
Micro Ridge

Le canteliver en alu est « tappered » et n’accepte que le diamant Ogura. C’est l’option la moins chère (280€)

Un avis mis à part utiliser le corps de la DL comme Magnet…?
Dernière édition par Dominique-Tanguy le 18 Jan 2024 à 11:33, édité 2 fois.
Avatar de l’utilisateur
Dominique-Tanguy
100 watts
100 watts
Messages: 2539
Inscription: 13 Jan 2014 à 09:51
Localisation: Cologne


Re: Dl103 boron ou alu

Message #2 par Hollow » 18 Jan 2024 à 11:18

Oui, plusieurs même…

a+
Dossier bi-câblage disponible par email sur demande.
Avatar de l’utilisateur
Hollow
500 watts
500 watts
Messages: 9410
Inscription: 21 Oct 2010 à 22:47
Localisation: Ch'nord


Re: Dl103 boron ou alu

Message #3 par bergui45 » 18 Jan 2024 à 11:26

Martin Gottman en Allemagne m'a retipé une SUPEX900 Super avec un cantilever en aluminium/taille Shibata et le résultat est Nickel!
Rapport Q/P excellent
Mon autre SUPEX900 a été retipée avant par Roberto Torlai avec Cantilver Boron:
du coup elle a été renommée "SuperTorlai" avec sa signature gravée sur l'avant de la cellule;

-- 18 Jan 2024, 11:39 --

Dominique: Je te mets la réponse de Der Nadelspezialist  (Martin Gottman)
ça remonte à 2020...

Hello!
At first, please sorry about my bad Englisch.

It´s better you send me the Cartridge, because we must controle it to
give you an correct answer about if its possible to repair it.
The price for the retipping with an Shibata Stylus will be 210 Euro additional Tax and Shipping.
The price for the retipping with an elliptical Stylus will be 70 Euro
additional tax  and shipping.

If you opt for the version with Shibata,

the difference can be heard clearly in the height dynamics.

There will probably be no difference in sound between boron / beryllium and aluminum Cantilevers since the system of needle and carrier as a whole must be understood. The best way to measure differences in the frequency response is to use resonances. But in our opinion the differences, if the overall construction is properly made, are small. The Boron Cantilvers  look a little highendiger and kink less easily. But we do not have the possibility to work up a boron or beryllium carrier. Only aluminum.
Best regards.

--
Der Nadelspezialist
Inh. Beate Göttmann
Wasenheck 9
55758 Veitsrodt
Tel. 06781-457574
Fax. 06781-457576
nadelspezialist@t-online.de
www.nadelspezialist.de
Avatar de l’utilisateur
bergui45
100 watts
100 watts
Messages: 1891
Inscription: 15 Nov 2010 à 01:02
Localisation: dans le VEXIN, pas loin de Gisors...


Retourner vers Le Vinyle

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 2 invités