Perso, j'ai monté des MJL1302 et MJL3281 si ma mémoire est bonne. Et je suis très satisfait du son. D'autres modifs ont été faites notamment un pont de diodes et coffret de l'ampli qui est en bois entre autres.
J'avais fait des recherches pour mon 20W à l'époque. Je te les livre brutes: C'est la copie d'échanges avec un copain à l'époque. Bon courage !
1/ Beaucoup de propositions sur le fil d'Elektor que nous avons regardé je crois:
http://www.elektor.fr/forum/forum/reali ... 6094.lynkx d'où j'extrais ça ci-dessous. On revient donc à ce que nous avons vu ensemble (en gras)
""Les BD245 et BD246 sont de piètre qualité (lents, peu linéaires et difficiles à appairer) et donc à l'opposé de la démarche engagée par Jean Hiraga à l'époque.
Les MJL1302 et MJL3281 sont bien plus en adéquation avec la recherche de performances originale liée au choix des 2SA627 et 2SD188. De plus, la résistance thermique plus faible va favoriser une meilleure durée de vie.
Bien à vous, Jean-Marc Plantefève."
Je suppose que la série "Audiophile" de OnSemi doit faire l'affaire comme les paires :
- MJL21193/21194,
- 4281/4302,
- NJW0281/0302
On s'aperçoit aussi que Elec diffusion a toutes les références pour les drivers aussi...mais à quel prix...
2/ un gars a utilisé ça: Toshiba 2SA1943 and 2SC5200
Mais il a construit la version 30W qu'il a poussée d'ailleurs, ces transistors le lui permettant. Mais il a dû faire d'autres modifs car il voulait 50W. Perso, je ne cherche pas à pousser le Hiraga. Son ampli est ici:
http://diyaudioprojects.com/Solid/Jean- ... Amplifier/2/ bis: Un autre gars d'un autre forum a utilisé des Toshibas aussi mais différents:
toshiba 2SB686/2SD716
http://www.audioasylum.com/audio/tweaks ... 43700.html3/ Autres expériences sur le forum américain:
http://www.diyaudio.com/forums/solid-st ... ass-7.htmlYes - I've built the 20W Class A as a pair of 40W (each) monoblocks using the Sanken 2SA2922/2SA1216 and BC550/60, and I'm getting very good results (still a work in progress).
4/
http://www.diyaudio.com/forums/solid-st ... ss-33.html"I would suggest that MJ15003 is too slow (fT 2.0MHz) and the capacitance is 1000pF,
The MJL0281 and MJL3281 are better choices the MJL0281 is the best out of the three in terms of speed / capacitance.
I would suggest using the toshiba 2SC5200/2SA1943 pair as the capacitance is much lower. another option would be Sanken 2SC3264/2SA1295"
5/ Ici, un Hongrois dit avoir essayé et comparé divers transistors y compris les originaux Hiraga. Voilà ce qu'il conseille: Ce n'est bien sûr que son avis.
"For the input please use the original , that would be the best choice for there . Is hard to find parts but some people still have .Try to much them !
For driver please use MJE15030/31 is much better than the original Hiraga uses .
For output please use MJ15024/25. I believe the best choice .
I tested many different output transistor at least 10 different transistors , I had the original NEC to but after I tested the MJ's I sold the original on Ebay . For me the Toshiba gave to soft bass not to talk about there are most Toshiba fake. Yes is stamped as Toshiba but nothing to do with Toshiba corporation .Toshiba does not produce these transistors more than 15 years .
The MJ15024/25 is in TO3 metal case it can take more heat than the TO247.
You can go to ON semi website , register and order samples .
It is possible to order 5PC from each output or driver transistor and 25PC from small signal transistor up to 25PC .Up to 10 different type of transistor , U need to pay only for the shipping .
Please use very short wire to connect the power transistor .For the input U can use longer wire .There is no need for preamp .
Use the modern PC layout , if I find them I will post it for you .
Regards"
Le même dit pourtant à la page 56
"For the first 2 stage I advise use the orig BJT even do hard to find them.
For Power transistor ON Semi MJ11022/23 or MJ11024/25 TO3 metal case transistor.
Driver On semi MJE15030/31 MJE15032/33
I have the opportunity to test the original Hiraga transistors, these what I advise to you sound far better! Deeper bass, better sound stage, more control specially in mid-bass area. All over cleaner and better sound! The heart of these amp the PS! And use solid wire to hook up the TO3 transistors. Min 400mA but I would go 500VA transformer 2x18VAC.
Do not replace the small BJT transistors! "